Record Settings - Philips DVDR3400 User Manual

Recording
(continued)

RECORD settings

(underlined options are the factory default settings)
Auto Chapter
Marker
Default Recording
Source
Default Recording
Mode
26
Automatically divides a recording (title) into chapters by inserting
chapter markers at a specifi c interval. This enables you to access a
specifi c point in the recording quickly.
{ On } – Chapter markers will automatically be inserted
within the title during recording at every 5
minutes interval.
{ Off } – No chapter marker is inserted in the
recording.
Defi ne your frequent source of recording. The recorder will
switch to the default source whenever it is turned on.
{ Tuner } – Input source from TV programs.
{ CAM1 } – Input source from the device connected to
the CAM1 and AUDIO L/R jacks on the front
panel.
{ CAM2 } – Input source from the device connected to
the CAM2 and AUDIO L/R jacks on the front
panel.
{ DV } – Input source from the device connected to
DV IN jack on the front panel.
{ EXT 1 } – Input source from the device connected to
the EXT1 VIDEO jack on the rear panel.
{ EXT 2 } – Input source from the device connected to
the EXT2 S-VIDEO jack on the rear panel.
{ EXT 3 } – Input source from the device connected to
the EXT3 Y Pb Pr in jacks on the rear panel.
Note: To change the current recording source without changing
the default setting, you can press the SOURCE button on the
remote control.
The recording mode defi nes the picture quality of recordings and
the maximum recording time on a disc.
The factory default setting is SP.
Record Mode
Picture Quality
HQ High Quality
SP Standard Play
SPP Standard Play Plus
LP Long Play
EP Extended Play
SLP Super Long Play
Maximum Recording
Time per Disc (hours)
1
2
2.5
3
4
6