Philips 55PFL5602 User Manual page 32

Y Y ou may adjust picture quality and enhancement settings using Pixel
Plus Ultra HD and Advanced settings sub menus.
Auto picture Dynamic contrast
Backlight Color enhancement
Contrast Black stretch
Brightness 120 PMR
Color 4K UHD Upscaling
Tint Macro Dimming
Sharpness Noise reduction
MPEG artifact reduction
Pixel Plus Ultra HD
Advanced settings
Picture format
Mode selection
Horizontal position
Vertical position
To select the desired setting, then press OK
Dynamic
contrast (Off, Minimum, Medium and Maximum)
Off To set color enhancement to off
Color
enhancement
To make colors more vivid and bright
On
Black To select the desired setting, then press OK
stretch (Off, Minimum, Medium and Maximum)
To set 120 PMR to Off
Off
120 PMR
On To make the video appear smoother
To select the desired setting, then press OK
4K UHD
Upscaling (Off, Minimum, Medium and Maximum)
Macro To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Dimming
Noise To select the desired setting, then press OK
reduction (Off, Minimum, Medium and Maximum)
MPEG
To select the desired setting, then press OK
artifact
(Off, Minimum, Medium and Maximum)
reduction
Auto picture Color alignment
Backlight Custom color management
Contrast HDR mode
Brightness
Gamma
Color
Blue stretch
Tint
Film mode
Sharpness
Pixel Plus Ultra HD
Advanced settings
Picture format
Mode selection
Horizontal position
Vertical position
To set the color temperature to Personal,
Cool, Normal and Warm.
Mode
When you adjust the following settings,
Personal will be set automatically.
To decrease red
Red gain
contrast
To decrease green
Green gain
Color
contrast
alignment
To decrease blue
Blue gain
contrast
To decrease red
Red offset
brightness
To decrease green
Green offset
brightness
To decrease blue
Blue offset
brightness
Off
Minimum
Medium
Maximum
Mode
Red gain
Green gain
Blue gain
Red offset
Green offset
Blue offset
Cursor Cursor
To increase red
contrast
To increase green
contrast
To increase blue
contrast
To increase red
brightness
To increase green
brightness
To increase blue
brightness
To select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
To rotate only
Tint selected color tint in
Custom color
clockwise direction
management
To decrease color
Saturation with only selected
color
To decrease
Brightness brightness with only
selected color
Off To set HDR mode to off
Automatically switches to a dedicated
HDR mode
*
picture quality setting when receiving HDR
Auto
signal
To select the desired setting, then press OK
(Very Dark Room, Dark Room, Normal, Bright Room and
Gamma
Very Bright Room)
To select the desired setting, then press OK
Blue stretch
(Off, Minimum, Medium and Maximum)
Off To set film mode to off
Film mode
To optimize the picture recorded by the
Auto
original film
* HDR mode settings are only available on the following models:
65PFL5602/F7
65PFL5602/F7 D
55PFL5602/F7
50PFL5602/F7
Other models, such as 65PFL5602/F7 C, automatically switch to the
decided picture settings upon receiving HDR signals.
Your model number can be confirmed on the rating label applied on the
rear cabinet.
Note(s)
•
Mode selection is available only if
–The external input modes are selected HDMI 1, HDMI 2 or HDMI 3.
–The connected HDMI device is outputting a video signal.
32
Cursor Cursor
To rotate only
selected color tint in
counterclockwise
direction
To increase color
with only selected
color
To increase
brightness with only
selected color
Continued on next page.
.
English