Mp3 Player; Create Mp3 Files - Philips HTD3500X User Manual

» If you have already installed the radio stations,
the last channel that you listened to is played.
» If you have not installed any radio stations,
the message AUTO INSTALL...PRESS
PLAY appears on the display panel. Press
.
2
Press the following buttons to listen or to change
radio stations:
Button Action
Select a preset radio station.
/
Navigation
Search for a radio station.
buttons (left/
right)
Navigation
Fine tune a radio frequency.
buttons (up/
down)
Press to stop the installation of
radio stations.
Press and hold to erase the
preset radio station.
PROGRAM Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
Listen to radio
1
Press RADIO.
•
To listen to a preset station, press
•
To search for a radio station, and then
listen, press Navigation buttons (left/right).
2
Press +/- (Volume) to change the volume.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. Switching the
tuning grid erases all preset radio stations.
1
Press RADIO.
2
Press .
3
Press and hold
kHz or 100 kHz.
EN
14
or
to toggle between 50

MP3 player

Connect your MP3 player to play your audio files
or music.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
Play music
1
Connect the MP3 player to the home theater
as described in the Quick start guide.
2
Press AUDIO SOURCE repeatedly until
'MUSIC I-LINK' appears on the display panel.
3
Press the buttons on the MP3 player to select
and play audio files or music.
Create MP3 files
Use your home theater to convert audio CDs into
MP3 files.
What you need
•
An audio disc.
•
A USB storage device
1
Connect a USB storage device to the home
theater.
2
Play your audio CD (CDDA/HDCD).
3
Press CREATE MP3.
» A confirmation message is displayed.
4
.
Select [Yes], and then press OK.
» The create MP3 screen is displayed. The
right panel contains MP3 settings and the
left panel shows the audio tracks.
5
Press the Navigation buttons and OK to select
and change:
• [Speed]: Select the write-to-file speed.
•
[Bitrate]: Select the conversion quality.
• [Device]: Select the USB storage device
which you use to store the MP3 files.
6
Navigate to the right panel, and then select the
audio tracks and press OK.
•
To select all tracks, navigate to [Select All],
and then press OK.
7
Select [Start], and then press OK to start the
MP3 conversion.
» A new folder which contains the MP3 files
is created in the USB storage device.