Philips HX3292/28 User Manual page 13

Features
Smartimer
The Smartimer indicates that your brushing cycle is complete by
automatically turning off the toothbrush at the end of the brushing cycle.
Dental professionals recommend brushing no less than 2 minutes
twice a day.
Note: If you press the power on/off button after you started the
brushing cycle, the toothbrush will pause. After a pause of
30 seconds, the Smartimer resets.
Easy-start
The Easy-start feature gently increases power over the first 14 brushings
to help you get used to brushing with the Philips Sonicare toothbrush.
This Philips Sonicare toothbrush comes with the Easy-start feature
activated.
Activating or deactivating the Easy-start feature:
Place the handle in the plugged-in charger.
- To activate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear
2 beeps and the battery level indicator lights up green to indicate
that the Easy-start feature has been activated.
- To deactivate Easy-start:
Press and hold the power on/off button for 2 seconds. You hear
1 beep and the battery level indicator lights up yellow to indicate
that the Easy-start feature has been deactivated.
Note: Each of the first 14 brushings must last at least 1 minute to
move through the Easy-start ramp-up cycle properly.
35_021_0743_4_Booklet_Simple_A6_3mm_v1.indd 13
13
English
17/02/17 10:19