Table of Contents
Advertisement
Machine actions
Coff ee is brewed slowly.
(See note)
Coff ee leaks out of the dispens-
ing spout.
Frothed milk is too cold.
The milk is not frothed.
The milk does not come out.
Causes
The coff ee grind is too fi ne.
The circuit is not primed.
The brew group is dirty.
The dispensing spout is clogged.
The cups are cold.
The milk carafe is dirty or not
inserted correctly.
The milk carafe dispenser has not
been pulled out correctly.
The milk carafe is not fully
assembled.
Note:
* These problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case wait until the
machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.
ENGLISH
Solutions
'Change coff ee blend or adjust the
grinder as explained in chapter "Adjust-
ing the ceramic coff ee grinder. '
Prime the circuit (see "Using the Ma-
chine for the First Time" chapter).
Clean the brew group (see "Weekly
Cleaning of the Brew Group" chapter).
Clean the dispensing spout and its
holes.
Preheat the cups with hot water.
Clean the carafe and insert it correctly.
Check that the milk dispenser has been
pulled out correctly.
Make sure that all components have
been correctly assembled.
69
69
Advertisement
Table of Contents
