Table of Contents
Advertisement
1
2
3
2
15
Empty the drip tray and place it back.
16
Install the milk carafe into the machine. Pull out the milk carafe
dispenser to the right up to the "
under both the milk carafe dispenser and the dispensing spout.
17
Press the "
" button to start the rinse cycle.
Note:
The rinse cycle may be paused by pressing the "
cycle, press the "
" button again. This allows you to empty the container or
to stay away from the machine for a brief period of time.
18
When this icon is displayed, the water tank is empty. Repeat steps 13-
17. When the machine shows this icon again, go to step 19.
19
When the water tank is empty, remove the water tank, rinse it and fi ll it
up to the MAX level with fresh water. Place it back into the machine.
20
Empty the container and place it back under the dispensing spout.
Note:
The circuit needs to be cleaned with a preset amount of water. If you had
not fi lled up the water tank to MAX level, the machine might require three or
more tanks for rinsing.
ENGLISH
" icon. Place the container back
" button. To resume the
59
59
Advertisement
Table of Contents
