Installing The Rear 2.5" Hard Drive--Sc216B Only - Supermicro SC216 Series User Manual

Installing the Rear 2.5" Hard Drive--SC216B Only

The SC216B model chassis supports an optional hard drive cage for two additional
2.5" hot-swappable hard drives. The hard drive cage installs in the rear of the chas-
sis next to the power supply. Once the hard drive cage has been installed, the 2.5"
hard drives may be removed without powering down the server.
Installing the 2.5" Rear Hard Drive Cage
1. Power down the system as described in Section 5-2, lay the chassis on a flat,
stable surface and remove the chassis cover.
2. Orient the rear hard drive cage as shown (Figure 5-5), aligning the opening at
the end of the cage with the opening at the back of the chassis.
3
2
Figure 5-5. Installing the Rear 2.5" Hard Drive Cage
Chapter 5: Chassis Setup and Maintenance
1
2
5-5