Table of Contents
Advertisement
3. Go to the V
4. B
or O
ROWSE
5. Press the U
CMM.
6. Once the upload finishes, turn on the blade module and press <D
BIOS setup utility.
7. In the B
OOT
the boot priority list.
8. Exit while saving the changes. The blade module will boot to the virtual media
(floppy image) A:\>.
9. Type flash filename.rom.
NOTE: Replace filename.rom by the actual ROM file name (such as B8DTE142.rom for
example) in the command.
6-3
Running Setup
NOTE: Default settings are in bold text unless otherwise noted.
The BIOS setup options described in this section are selected by choosing the
appropriate text from the M
section, although the screen display is often all you need to understand how to set the
options.
When you first power on the computer, the BIOS is immediately activated.
While the BIOS is in control, the Setup program can be activated in one of two ways:
1. By pressing <D
2. When the message Press the <Delete> key to enter Setup appears briefly at the
bottom of the screen during the POST, press the <D
S
menu:
ETUP
M
menu and select F
IRTUAL
EDIA
to locate the *.img file on your desktop and select it.
PEN
button and wait a few seconds for the image to upload to the
PLOAD
M
, bring USB LS120: PEPPCMM VIRTUAL DISC 1 to the top of
ENU
BIOS S
AIN
> immediately after turning the system on, or
ELETE
I
LOPPY
MAGE
screen. All displayed text is described in this
ETUP
ELETE
6-3
Chapter 6: BIOS
U
.
PLOAD
> to enter the
EL
> key to activate the main
Advertisement
Table of Contents
