Quartz Watches - Edox 10007 3 AIN Instruction Manual

Pusher B: stop to read the split time.
The chronograph continues to operate.
Pusher B: restart
The chronograph hands catch up with the
elapsed time.
Pusher A: for the last stop and to display
the total time.
Pusher B: reset.
NB: the hands should be reset to their
original position before the chronograph is
used:
Resetting of the 60 minutes hand to
zero: crown in position 2 and pusher B.
Resetting of the 30 seconds hand to
zero: crown in position 3 and pusher A.
Resetting of the 5 minutes hand to
zero: crown in position 3 and pusher B.
After setting the hands to their original
positions, return to crown position 1.
Edox 10, 104
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop.
Turn the crown forwards or backwards.
Synchronise the seconds by pushing the
10
crown back to position 1 to coincide with
a given time signal.
Chronograph functions:
Pusher A: start – stop, start – stop, etc.
Timing to 1/10 of a second for up to
30 minutes.
Pusher B: reset (after a stop)
Accumulated timing chronograph:
Press button A to start. Press button B
after arrival of the first "sprinter" – The
time will be indicated. Press button A after
arrival of the second "sprinter" – The time
is memorized. Read the time of the first
"sprinter". Press button B to read the time
of the second "sprinter" (the chronograph
hands will turn at a faster speed until indi-
cation of the time). Press button B to reset
hands to zero.
NB: the hands should be reset to their
original position before the chronograph is
used:
Pull out the crown to position 3.
Press the button A and B at the same time
for at least 2 seconds.
Press (1 x short for single or 1 x long for
continuous) button A to adjust the centre
stop second.
Press button B to adjust the next hand.
Press (1 x short for single or 1 x long for
continuous) button A to adjust the
1/10 second hand.
Press button B to adjust the next hand.
Press (1 x short for single or 1 x long for
continuous) button A to adjust the minute
hand.
Return to crown position 1.

4.5 Quartz watches

Edox 21, 28, 64
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Time setting: hours and minutes. Pull
the crown out to position 2.
Turn the crown forwards or backwards.
Push the crown back to position 1.
Edox 23
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop.
Turn the crown forwards or backwards.
Synchronise the seconds by pushing the
crown back to position 1 to coincide with
a given time signal.