Table of Contents
Advertisement
Network updates
You can update the software by connecting the unit to the Internet.
1
Press MENU and use
OK.
2
Use
to Select Network, then press OK.
3
Use
to Select Yes, then press OK.
•
This unit will then start checking for the latest FirmWare (software)
version.
4
Confirmation message will appear.
Use
to Select Yes, then press OK.
•
The unit will start downloading the latest FirmWare (software)
version.
•
The unit will start updating the FirmWare (software) version.
•
It may take a while to complete the updating.
5
When the software update is complete, press
goes to Standby mode.
6
Unplug the AC power cord for a few seconds from AC outlet and plug
it again.
7
Press
again to Turn the unit On.
•
The TV starts up with the new software.
For further assistance, please contact Call Center.
Note(s)
•
Please do not unplug the AC power cord or Ethernet Cable while executing the Network
updates.
•
All settings will remain the same even if you update the software version.
•
The version of Net service will also be updated if newer version of Net service is available when
updating the firmware.
•
When you start up the TV or a net service after executing the software update, a message may
appear on the screen prompting for software update again. In this case, please select Update
to start USB update or network update. For further assistance, please contact call center.
to Select Update software, then press
to make sure the unit
Software settings
Software
1
Press MENU and use
OK.
2
Use
to Select Software, then press OK.
Checking your current Software version number
1
Use
to Select Software information, then press OK.
•
The version and a description of the current software is displayed.
Checking your current Cast software version number
1
Use
to Select Cast software version, then press OK.
•
The Cast software version is displayed.
License
Displays the Licenses of Open Source Software used in this unit.
1
Use
to Select License, then press OK.
•
Licenses of Open Source Software used in this unit are displayed.
Digital rights management
This product contains technology subject to certain intellectual property
rights of Microsoft. Use or distribution of this technology outside of this
product is prohibited without the appropriate license(s) from Microsoft.
1
Use
to Select Digital rights management, then press OK.
•
Digital rights management is displayed.
41
to Select Software settings, then press
.
English
Advertisement
Table of Contents
