Step 2 Fixing The Outdoor Unit In Place - Samsung AC MXAD H Series Installation Manual

Installation Procedure

Step 2 Fixing the outdoor unit in place

Install the outdoor unit on a rigid and stable base to
prevent disturbance from any noise caused by vibration.
When installing the unit at a height or in a location
exposed to strong winds, fix the unit securely to a
support (i.e., a wall or a ground).
Fix the outdoor unit with anchor bolts. Make sure that
the anchor bolts are 20 mm or higher from the base
surface.
Anchor bolt hole
CAUTION
• Install a drain outlet at the lowest end around the
base for outdoor unit drainage
• When installing the outdoor unit on the roof,
waterproof the unit and check the ceiling strength.
• Make sure that the wall can support the weights of
the rack and the outdoor unit.
• Install the rack close to the column as much as
possible.
8
English
Optional: Fixing the outdoor unit to a wall with
a rack
Designed to cut off residual vibration from
outdoor unit to rack. (not supplied with product)
Anchor bolt
(Unit : mm)
Base surface
• Install a proper grommet in order to reduce noise and
residual vibration transferred by the outdoor unit
towards the wall.
CAUTION
• When installing an air guide duct, be sure to check
the following:
– The screws do not damage the copper pipe.
– The air guide duct is fixed firmly on the guard fan.
Soft rubber designed to cut off vibration from
rack to wall. (not supplied with product)