Motherboard Features - Supermicro B1SD2-TF User Manual

B1SD2-TF Motherboard User Manual

Motherboard Features

CPU
Memory
Network Connections
I/O Devices
BIOS
Power Configuration
PC Health Monitoring
Intel ® Xeon ® D SoC (BGA Package)
Each SoC supports 8 cores
Supports up to 128GB of DDR4 ECC VLP RDIMM
memory of speeds up to 2400MHz in eight memory slots
DIMM sizes
DIMMs 2 GB, 4GB, 8GB, 16GB, and 32GB
Intel ® HostRAID
Dual 10G Ethernet ports with KR or 1G Ethernet ports
with KX interface to BP
SATA Connections
SATA 3.0 (6Gb/s)
IPMI 2.0
IPMI 2.0 supported by Aspeed AST2400 BMC (Base-
board Management Controller)
IPMI via CMM
128 Mb AMI BIOS ®
Plug and Play, DMI 2.0, PCI 2.2, ACPI 3.0, SMBIOS 2.7,
BIOS Rescue Hotkey, Riser Card Auto Detection, BMC
GPIO
ACPI/ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Onboard Voltage Monitoring
+3.3V, +5V, +12V, +3.3V Stby, +5V Stby, VBAT, CPU volt-
age, Memory voltage, CPU Temp., System Temp., and
Memory Temp.
CPU 1+1-phase switching voltage regulator
CPU/System overheat LED and control
CPU Thermal Trip support
SoC Thermal Control Circuit (TCC) mechanism
Thermal Monitor Support
Fan Control
Low noise fan speed control
1-6
One (1) SATA 3.0 Connector per
Node
RAID 0, 1
SPI EEPROM BIOS