Kenwood Nexedge NX-320E Instruction Manual page 28

4 When the called party responds, press the PTT switch and
speak into the microphone. Release the PTT switch to
receive.
• Only one person can speak at a time.
5 To end the call, press and hold the PTT switch, then
press the # key or the key programmed as [Telephone
Disconnect].
RECEIVING A TELEPHONE CALL
1 When a telephone call is received, the transceiver will
automatically change to the correct group ID and you will
hear the call.
• A ringer tone will sound when a call is received.
2 Press and hold the PTT switch to speak, and release it to
receive.
• Only one person can speak at a time.
3 To end the call, press and hold the PTT switch, then
press the # key or the key programmed as [Telephone
Disconnect].
20