Table of Contents
Advertisement
2-5-1 Installing Add-on Card (Optional)
Follow these instructions to install Add-on card:
1.
Remove theriser bracket from the system following the steps outlined in 2-5 Installing the PCI
Expansion Card.
2.
Remove the PCI bracket..
3.
Insert the dedicated rear bracket and secure with screw.
4.
Engage the support bracket with mezzaine card and secure with screws.
5.
Attach the interposer card to the selected slot (PCIE_4).
6.
Insert the add-on card into the interposer card. Make sure that the card is properly seated.
7.
Tighten the thumbscrew.
8.
Reverse the previous steps to install the riser bracket.
1
Hardware Installation
3
5
6
4
- 23 -
2
Advertisement
Table of Contents
