Keypad Function; Control Buttons On The Front Bezel; Hot Key Operation - Acer H243 Service Manual

Acer
Number of Pixel
Pixel Arrangement
Brightness
Contrast Ratio
Viewing Angle
Display Mode
Frame rate
Response Time
Surface Treatment
Lamp
Outline Dimension

5.2 Keypad Function

5.2.1

Control buttons on the front bezel

CONTROL KEY
[POWER]
[►], [◄]
[MENU]
[AUTO]
[e Color ]
[Input select]
5.3

Hot Key Operation

HOT KEY OPERATION
FUNCTION
e Color
1920 × 1080
R.G.B. Vertical Stripe
2
300 cd/m (TYP.)
1000 (TYP.)
170(Horizontal) / 160(Vertical)
Normally White
75
5ms (TYP. ON/OFF) / 2ms (Gray to Gray)
Anti-Glare, 3H
4
556.0(W) ×323.2(H) ×16.65(D) (TYP.)
KEYS FUNCTION
Power on or power off the monitor
A. When "Main OSD" displays, press these keys to change the contents of an adjustment
item, or change an adjustment value
B. When "Main OSD" un-displays, press [►] to show "Audio" OSD and increase the
volume, press [◄] to show "Audio" OSD and decrease the volume .
A. When "Main OSD" un-displays, press [MENU] to enter OSD interface.
B. When "Main OSD" displays, press [MENU] to perform function of menu icon that is
highlight or enter next level menu.
A. When "Main OSD" un-displays, press [AUTO] to perform auto-adjustment
B. When "Main OSD" displays, press [AUTO] to return to previous level menu
C. When "Empowering Technology OSD" displays, press [AUTO] to exit the OSD
A. When "Main OSD" un-displays, press [e Color] to show "Empowering Technology
OSD".
B. When "Main OSD" displays, press [e Color] to exit the OSD, and to show "Empowering
Technology OSD"
A. Press "input key" one time to search (a port with signal in order)
B. Show "source icon" at the same time, as searching that port
C. Go into next port automatically, if search the port without signal
D. Display it, if search the port with signal
◄
AUTO MENU
►
DESCRIPTION
POWER
8
Acer –LCD-H243H