Replacing The Presser Foot - Brother NQ3600D Operation Manual

Replacing the Presser Foot

CAUTION
• Use the presser foot appropriate for the type
of stitch that you wish to sew, otherwise the
needle may hit the presser foot, causing the
needle to bend or break.
• Only use presser feet designed specifically for
this machine.
Replacing the presser foot
a Press (Needle position button) once or twice to
raise the needle.
b Press .
• When the message "OK to automatically lower the
presser foot? " appears on the LCD screen, press
to continue.
 The screen changes, and all keys and operation
buttons are locked (except
c Raise the presser foot lever.
d Press the black button at the back of the presser foot
holder in order to remove the presser foot.
a
b
1 Black button
2 Presser foot holder
e
f
).
g
h
Replacing the Presser Foot
Place a different presser foot below the holder so that
the presser foot pin is aligned with the notch in the
holder.
1
2
3
1 Presser foot holder
2 Notch
3 Pin
4 Presser foot type
Slowly lower the presser foot lever so that the presser
foot pin snaps into the notch in the presser foot holder.
1
1 Presser foot lever
2 Presser foot holder
3 Notch
4 Pin
 The presser foot is attached.
Raise the presser foot lever to check that the presser
foot is securely attached.
1
1 Presser foot lever
Press to unlock all keys and buttons.
Basic operations B-33
4
J
2
3
4
B