Specify Ipv6 Internet Connections - NETGEAR RAXE500 User Manual

Note: For information about port aggregation to a LAN device, see Manage Ethernet
Port Aggregation to a LAN Device on page 96.
To set up Internet port aggregation, you need the following:
• A service provider that offers an Internet speed that's over 1 Gbps.
• A modem that support both an Internet speed that's over 1 Gbps and two Ethernet
ports that support static Link Aggregation Control Protocol (LACP), for example, a
NETGEAR Nighthawk multi-speed cable modem, model CM1200.
To set up Internet port aggregation:
1. Set up Internet port aggregation on your modem.
For information about how to set up Internet port aggregation on your modem, see
the documentation that came with your modem.
2. Log in to your router and enable Internet port aggregation:
a. Launch a web browser from a computer or mobile device that is connected to
the router network.
b. Enter http://www.routerlogin.net.
A login window opens.
c. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
d. Select Internet.
The Internet Setup page displays.
e. In the WAN Preference section, select the Multi-Gig Internet (1 Gbps + 1 Gbps)
radio button.
f. Click the Apply button.
Your settings are saved.
3. Connect the Internet port and Ethernet port 1 on your router to two Ethernet ports
on your modem.

Specify IPv6 Internet connections

You can set up an IPv6 Internet connection if the router does not detect it automatically.
Specify Your Internet Settings
Nighthawk AXE11000 Tri-Band WiFi 6E Router
32 User Manual