Machine Disassembly and Replacement
Please also refer to the AcerPower F1 Service CD for the assembly/disassembly procedure.
To disassemble the computer, you need the following tools:
Wrist grounding strap and conductive mat for preventing electrostatic discharge.
Wire cutter.
Phillips screwdriver (may require different size).
NOTE: The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatches when putting back the components.
NOTE: The AcerPower F1 mechanical housing is similar with AcerPower SV.
Chapter 3
Chapter 3
43