Acer TravelMate C110 Service Manual page 46

Parameter
Interrupt
DMA Channel
Parallel Port
Mode
Base I/O address
Interrupt
38
Description
Sets the IRQ of the Com operation.
Help: Set the base I/O address for serial port A.
Sets a DMA channel for the printer to operate in ECP
mode. This parameter is enabled only if operation
mode is set to ECP.
Help: Set the DMA channel for the parallel port.
Enables or disable the parallel port.
The parallel port is a PnP device. Enabled/Disabled
setting won't affect the Windows Device Manager
setting of the parallel port.
Sets operation mode of the parallel port.
Only set the parallel post operation mode in BIOS
setup. If set to be ECP mode, the Windows will
assume the parallel port as the ECP port.
If operation mode is set to Base I/O address, sets the
base I/O address, of the parallel port.
If operation mode is set to interrupt, sets the interrupt
request of the parallel port.
If operation mode is set to ECP DMA Channel, sets
the direct memory access (DMA) channel for the
printer to operate in ECP mode. This parameter is
enabled only if operation mode is set to ECP.
Help: Set the mode for the parallel port using
Sets speration mode of the parallel port.
Only set the parallel post operation mode in BIOS
Setup. If set to be ECP mode, the Windows will
assume the parallel port as the ECP port.
Help: Set the mode for the parallel port using
Sets the base I/O address of the parallel port.
Help: Set the base I/O address for the parallel port.
Sets the interrupt request of the parallel port.
Help: Set the interrupt request for the parallel port.
Options
IRQ3
IRQ4
DMA1
DMA3
Disabled
Enabled
Auto
Bi-directional
EPP
ECP
378, 278, or 3BC
IRQ5 or IRQ7
TravelMate C110