Contents 1 Important 7 Other features Safety Set the alarm timer Notice Set the sleep timer Listen to an external device Charge your devices 2 Your Micro Music System Introduction 8 Product information What's in the box Overview of the main unit Specifications Overview of the remote control USB playability information...
1 Important Warning • Never remove the casing of this apparatus. • Never lubricate any part of this apparatus. • Never look into the laser beam inside this Safety apparatus. • Never place this apparatus on other electrical equipment. Read and understand all instructions •...
Directive 2014/53/EU. You can find the omitted. We have tried to make the Declaration of Conformity on www. packaging easy to separate into three philips.com/support. materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Care of the environment...
Congratulations on your purchase, and • Remove the discs from the disc welcome to Philips! To fully benefit from compartment if you are not using the support that Philips offers, register the product for an extended period your product at www.philips.com/...
Overview of the main unit a IR sensor • Connect USB storage devices. b LED indicator • Standby indicator: turns red • when this product is switched to Open or close the disc standby. compartment. • Bluetooth indicator: turns f Disc compartment blue to indicate the Bluetooth connection status.
Overview of the remote • Press to select a source: DISC, control USB, TUNER, AUDIO IN, BT. • In Bluetooth mode, press and hold for more than 2 seconds to disconnect the currently connected device and enter pairing mode. • Start or pause play.
Page 8
• Tune to a FM station. • • Adjust time. Select Bluetooth source • In Bluetooth mode, press and hold for more than 2 seconds • Select shuffle mode to play to disconnect the currently tracks randomly. connected device and enter •...
3 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Connect power Connect speakers Caution Note •...
Prepare the remote Note control • The product switches to standby mode after 15 minutes inactive. • To achieve the efficient energy saving Caution performance, unplug any external electronic device from the USB port when • Risk of product damage! When the remote the device is not in use.
4 Play Play from disc Press to select CD source. Press to open the disc compartment. Insert a disc with the label side up. BTM1560 Press to close the disc compartment. » Play starts automatically. If not, press Control play Start, pause, or resume play.
Bluetooth devices that Play from Bluetooth- can be paired (refer to the user enabled devices manual of the device). Select “Philips BTM1560” on your Bluetooth enabled device and Note if necessary input '0000' as the • Compatibility with all Bluetooth devices is paring password.
5 Listen to FM Play audio on the connected device. radio » Audio streams from your Bluetooth enabled device to this product. To disconnect the Bluetooth-enabled Tune to a radio station device: • Deactivate Bluetooth on your device. • Press and hold •...
6 Adjust sound Store radio stations manually The following operations are applicable Tune to an FM radio station. to all supported media. Press to activate program mode. » ] is displayed. Select a preset sound effect Press to allocate a number from 1–20 to this radio station, and then press to confirm.
7 Other Activate/deactivate alarm timer features In standby mode, press repeatedly to activate or deactivate timer. » If timer is activated, is displayed. Set the alarm timer • In standby, you may press and hold to toggle clock display on This product can be used as an alarm or off.
Note • Compatibility of this product with all devices is not guaranteed. BTM1560 AUDIO IN Charge your devices With this micro music system, you can charge your external devices, such as your cell phone, MP3 player or other mobile devices. Use a USB cable to connect the USB socket of this product with the USB socket of your devices.
8 Product • Operation power consumption: information • Bluetooth standby power consumption: < 2W • Standby power consumption: < 0.5W (clock display off) • Dimensions (W x H x D): Note 220 x 104 x 242 mm (Main unit); • Product information is subject to change 120 x 197 x 144 mm (Speaker box) without prior notice.
If the problem • ISO9660, Joliet remains unsolved, go to the Philips Web • Maximum title number: 128 page (www.philips.com/support). When (depending on file name length) you contact Philips, make sure that the •...
Page 19
The audio quality is poor after Remote control does not work • connection with a Bluetooth-enabled Before you press any function button, first select the correct device. • source with the remote control The Bluetooth reception is poor. instead of the main unit. Move the device closer to this unit •...
Page 20
How to keep clock display on or off in standby? • In standby, press and hold to toggle clock display on or off.
Page 21
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.