Setting The Signal - Bosch WVH28470EP Instruction Manual And Installation Instructions

Setting the signal

en
M
Setting the signal
S e t t i n g t h e s i g n a l
1. Activate setting mode for the signal volume
Turn to Ú Stop.
2. Set the volume for the button signals (depending on model)
Press the 0 button until the
required volume is reached.
3. Selecting the volume for the information signals
Turn one position clockwise
28
Turn one position
clockwise.
Go to step 3. or
Press the 0 button until the
required volume is reached.
Press and hold the ° C button + turn one
position clockwise.
Set to Ú Stop, which exits setting mode for
the signal volume.
Release the button.
Set to Ú Stop, which exits set-
ting mode for the signal volume.