Switching On The Appliance - Siemens KGF49PI40 Instructions For Use Manual

en
11
Button lock/alarm off
This button is used to
switch off the audible warning
■
signal (see section "Alarm
function")
Switch the button lock on and
■
off.
12
Eco mode indicator
This lights up when the eco mode
is switched on.
13
Selection button for appliance
zone
To make settings for one
appliance zone, repeatedly press
the selection button.
14
Display ALARM
This lights up if the appliance
becomes too warm.
15
Setting buttons +/-
The buttons are used to set the
temperatures of the refrigerator
and freezer compartment.
16
"super" button
Is used to switch on the super
cooling (refrigerator
compartment) as well as super
freezing (freezer compartment)
functions (see chapter Super
cooling or chapter Super
freezing).
17
Mode button
For selecting the special
functions. See chapter entitled
"Special functions".
18
Display freshness mode
This lights up when the freshness
mode is switched on.
10
Switching on the
appliance
1. First insert the plug into the
connection on the back of the
appliance. Check that the plug has
been inserted all the way.
2. Then insert the other end of the cable
into the socket.
The appliance is now switched on and a
warning signal sounds.
Press the lock/alarm off button to switch
off the audible warning signal.
The ALARM display goes out when the
appliance has reached the set
temperature.
The preset temperatures are reached
after several hours. Do not put any food
in the appliance beforehand.
The factory has recommended the
following temperatures:
freezer compartment: -18°C
■
VitaFresh compartment: 0 °C to 2 °C
■
cooling compartment: +4°C
■
Operating tips
After the appliance has been switched
■
on, it may take several hours until the
set temperatures have been reached.
The fully automatic NoFrost system
■
ensures that the freezer section
remains free of ice. Defrosting is no
longer required.
If the door cannot be immediately re-
■
opened after it has been closed, wait
until the resulting low pressure has
equalised.