Advertisement
Getting Started
Setting up a Wireless Ad Hoc Network
Install a network adapter into one computer. In the example above,
the D-Link Air DWL-120 USB Wireless Network adapter is
installed. You can also install the DWL-520 Wireless PCI Adapter
in the desktop computer.
with the product for installation instructions
Install the WCB-B13 into a laptop computer.
Installation Guide included with the product
Set the wireless configuration for the adapters to Ad-Hoc mode,
set the adapters to the same channel, and assign an IP Address
to each computer on the Ad-Hoc network. (See Box below)
When assigning IP Addresses to the computers on the network, please
remember that the IP Address for each computer must be in the same IP
Address range as all the computers in the network, and the subnet mask
must be exactly the same for all the computers in the network.
For example: If the first computer is assigned an IP Address of 192.168.0.2
with a Subnet Mask of 255.255.255.0, then the second computer can be
assigned an IP Address of 192.168.0.3 with a Subnet Mask of
255.255.255.0, etc.
IMPORTANT: If computers or other devices are assigned the same IP
Address, one or more of the devices may not be visible on the network.
DWL-120
See the Quick Installation Guide included
IP Address
11
.
See the Quick
.
WCB-B13
Advertisement
