Power Management; Environmental Requirements - Acer TravelMate 2310 Service Manual

AC Adapter
Item
Over Voltage Protection (OVP)
Short circuit protection
Electrostatic discharge (ESD)
Dielectric Withstand Voltage
Primary to secondary
Leakage current
Regulatory Requirements

Power Management

Power Saving Mode
Standby Mode
Enter Standby Mode when
1.Standby/Hibernation hot-key is pressed
and system is not ready to enter Hibernation
mode.
2.System standby/ Hibernation timer expires
and system is not ready to enter Hibernation
mode.
Hibernation Mode
Enter Hibernation Mode (suspend to HDD)
when
1.Hibernation hot-key is pressed and
system is ready to enter Hibernation mode
2.System Hibernation timer expires and
system is ready to enter Hibernation mode.
Display Standby Mode
Keyboard, built-in touchpad, and an external
PS/2 pointing device are idle for a specified
period.
Hard Disk Standby Mode
Hard disk is idle within a specified period of
time.

Environmental Requirements

Item
Temperature
Operating
Non-operating
26
24V
3.9A max can be protected and output can be shorted without damage
15KV (at air discharge)
8KV (at contact discharge)
3000Vac
0.25 mA max. (@ 254Vac, 60Hz)
Safety Requirements:
1.The subject product rated 100-120V 60Hz must be listed under UL 1950 and
certified with SCA Standard C22.2 No.950.
2.The subject product rated 200-240V 50Hz must comply with low voltage
directive 73/23EEC.
EMI Requirements:
1.The subject product rated 100-120V 60Hz must meet the EMI requirements
of FCC part 15, Subpart B for Class B Digital Device and get FCC Certification
before marketing into USA and Canada.
2.The subject product rated 200-240V 50Hz must meet the EMC Directive 89/
336/EEC.
3.The subject product rated 100-120V must meet the VCCI-2 EMI
requirements.
The buzzer beeps
The Sleep indicator lights up
All power shuts off
The display shuts off
Hard disk drive is in standby mode.
(spindle turned-off)
°
+0~+35 C
°
-20~+65 C
Specification
Phenomenon
Specification
TravelMate 2310