Basic Operation; Switching On The Appliance; Setting A Programme; Adjusting The Programme Settings - Bosch WAU28R90GB User Manual And Installation Instructions

en Basic operation

Basic operation

13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Press .
▶
It may take a few seconds for the
appliance to switch on.
13.2 Setting a programme
Set the programme selector to the
1.
required programme.
→ "Programmes", Page 25
If necessary, adjust the pro-
2.
gramme settings → Page 38.
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 38
38
Adjust the programme settings.
▶
→ "Programmes", Page 25
Please follow the information about
operating logic.
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡ A programme has been set.
¡ The programme settings have
been adjusted.
Press and hold
▶
seconds.
Press to call up the saved pro-
gramme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 25.
Requirement: The laundry is pre-
pared and sorted.
→ "Laundry", Page 34
for approx. 3