Table of Contents
Advertisement
Acer Bluetooth
VoIP Phone Layout
LED Indicators
LED
Bluetooth
connection/
pairing indicator
Charge/Power
indicator
Charging the Phone
You need to charge the phone before initial use. It takes approximately four hours for a full charge.
To charge the phone:
1. Turn the notebook on.
2. Locate the PC Card (PCMCIA) slot.
3. Insert the phone to the slot label up. Make sure that the phone is completely pushed on the slot.
NOTE: The notebook detects the device and displays a New Device Wizard window. Click No, not this time,
then close the window.
4. The power/charge indicator lights up during charge and turns off when the battery is full. Eject the phone
from the PC Card slot when charging is finished.
Chapter 1
VoIP Phone
®
#
1
2
3
4
5
6
7
8
9
10
Color
Status
Blue
Blinking fast
Blinking slow
Off
Amber
On
Off
Blinking
Note:
Wizard
Description
PC Card (PCMCIA) interface connector
Speaker
Power button
Bluetooth connection/pairing indicator
Charge/Power indicator
Microphone
Flip
Bluetooth connection/pairing button
Speaker phone button
Volume up/down button
The phone is in pairing mode.
The phone is linking with the notebook.
The phone is not paired or linked with the notebook.
The phone is charging.
The phone is fully-charged.
The phone needs to be recharged.
No, not this time,
Description
New Device
17
Advertisement
Table of Contents
