Using The Bluetooth Optical Mouse; Installation; Usage - Acer Ferrari 1000 Service Manual

Using the Bluetooth Optical Mouse

The Ferrari notebook comes with a Bluetooth optical mouse.

Installation

Installation of the Bluetooth mouse is simple. Enable Bluetooth functionality by pressing the
Bluetooth communication button on the front panel.
Turn the mouse upside down. Make sure the power switch is ON. Press and hold the Connect button
1.
for three seconds. The mouse is now in pairing mode and is ready to connect to the computer.
On the notebook, open My Bluetooth Places by double-clicking on the Bluetooth icon.
2.
From the menu bar, select Bluetooth and then Bluetooth Setup Wizard.
3.
Select I want to find a specific Bluetooth device and configure how this computer will use its
4.
devices. Then click Next.
From the drop-down menu, select Show mice, keyboards and joysticks, and then click on the
5.
Search Again button.
The Acer mouse will be discovered. Click on the Acer mouse icon, and then click Next.
6.
The services that are available from the device will be listed. Select Bluetooth Mouse and click Finish.
7.
Wait while the mouse is installed. This may take several seconds.
8.
The mouse is now connected. Move the mouse to verify the connection.
9.

Usage

Use the Bluetooth mouse as you would a traditional mouse. For optimal performance, use a
mouse pad. Using the Bluetooth mouse on a transparent or reflective surface will inhibit the
ability of the optical sensor to track the cursor.
Chapter 1 19