Advanced Product Features - Fellowes Microshred 225Mi Manual

BASIC SHREDDING OPERATION
2
1
AUTO
Plug in and put disconnect Press ( ) ON to activate
power switch in ON
(I) position

ADVANCED PRODUCT FEATURES

Jam Proof System
Eliminates paper jams and
powers through tough jobs
JAM PROOF SYSTEM OPERATION*
Eliminates paper jams and powers through tough jobs.
Advanced Jam Prevention- Electronically
1
measures paper thickness to prevent paper jams:
If a misfeed
occurs:
*100% Jam Proof when used in accordance with user manual
SET-UP AND TESTING
1 2
AUTO
Turn the shredder ON
Touch test area and
( ) to activate SafeSense look for the SafeSense
®
indicator to illuminate
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com
3
4
or
Feed paper/card straight Hold CD/card at edge,
into paper entry and and feed into center of
release entry and release
Up to RED: Too many
sheets have been inserted.
Up to YELLOW: Productivity
is optimized.
Up to GREEN: More sheets
can be added.
All indicators light up and
shredder pauses for 3-6 seconds
SAFESENSE TECHNOLOGY OPERATION
®
Stops shredding immediately when hands touch the paper opening.
3 4
SafeSense is active and If hand is held on SafeSense
®
working properly area more than 3 seconds
®
shredder will shut off
5
6
or
AUTO
When finished
Do nothing and shredder
shredding set to
will go automatically to
OFF ( ) sleep mode after 2 minutes
of inactivity
Patented SafeSense Technology
®
Stops shredding immediately when
hands touch the paper entry
2
Remove several sheets until
indicator is below red.
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
standby mode and sleep mode.
WHEN IN SLEEP MODE
1
®
In sleep mode
Energy Savings System
Optimal energy efficiency 100% of the
time – in use and out of use.
3
Continue 100% Jam
Proof Shredding
If illuminates after paper has been
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
ENERGY SAVINGS SYSTEM
Optimal energy efficiency 100% of
the time – in use and out of use.
2
3
or
AUTO
To get out of sleep mode insert paper
touch control panel
3