Advanced Product Features - Fellowes 3229901 Manual

BASIC SHREDDING OPERATION
PAPER OR CD/CARD
1
1
Continuous operation:
NOTE: Shredder runs briefly
after each pass to clear entry.
Plug in and put
Continuous operation beyond disconnect power
switch in ON (I) position

ADVANCED PRODUCT FEATURES

Jam Proof System
JAM PROOF SYSTEM OPERATION*
1
If a misfeed
*100% Jam Proof when used in accordance with user manual
SAFESENSE
Stops shredding immediately when hands touch the paper opening.
SET-UP AND TESTING
2 1 2
Turn the shredder ON
Touch test area and
( ) to activate SafeSense look for the SafeSense
®
indicator to illuminate
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com
2
2
Press ( ) ON to
activate (blue)
sheets have been inserted.
can be added.
All indicators light up and
® TECHNOLOGY OPERATION
3 4
SafeSense is active and If hand is held on SafeSense
®
working properly area more than 3 seconds
®
shredder will shut off
3 4
or
Feed paper straight into To shred CDs or credit
paper entry and release cards rotate safety flap
into place
Patented SafeSense ® Technology
Stops shredding immediately when hands
touch the paper opening.
2
Remove several sheets until
indicator is below red.
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
standby mode and sleep mode.
WHEN IN SLEEP MODE
1
®
In sleep mode
5
6
Hold card/CD at edge. When finished
Feed into center of shredding set to
entry and release OFF ( )
SilentShred™ Technology
shreds without noisy disruptions.
3
Proof Shredding
If illuminates after paper has been
ENERGY SAVINGS SYSTEM
2 2 3
or
insert paper
To get out of sleep mode
touch control panel
3