Speaker Module Removal
Prerequisite:
Upper Cover Removal
1. Locate speaker modules (D) on upper cover. Refer to
2. Remove two (2) screws (A) (Figure 3-34).
C
B
Figure 3-34. Speakers
3. Remove speaker cable (C) from mainboard connector (B).
4. Remove speaker modules.
Speaker Module Installation
1. Install speaker modules on lower cover
2. Install speaker cable (C) to mainboard connector (B).
3. Install and secure two (2) screws to lower cover.
4. Install upper cover.
Machine Maintenance Procedures
A
Figure
A
(Figure
3-34).
3-29.
0
0
3-35