Philips SignageSolutions 55BDL5057P User Manual page 64

55BDL5057P
Keyboard control
Choose to enable or disable the display keyboard (control buttons)
function.
• {Unlock} - Enable the keyboard function.
• {Lock All} / {Lock all but Volume} / {Lock all but Power} / {Lock
all except PWR & VOL} - Disable the keyboard function.
NOTE: " Keyboard Control Lock Mode" This function completely
disables the access to all Keyboard Control functions. To
enable or disable the keyboard control lock, press both [ ]
and [ ] buttons and hold down continuously for more than 3
seconds.
Tiling
With this function you can create a single large-screen matrix (video
wall) that consists of up to 150 sets of this display (up to 10-sets on
the vertical and 15-sets on the horizontal sides). This function requires
a daisy-chain connection.
• Switch on delay: Set the power-on delaying time (in seconds). The
default option {Auto} allows a sequential powering-on for each
display by their ID number when multiple displays are connected.
The options are: {Off (0) / Auto(1) / 2-255}
• Brightness: {Normal}/{ACS}
• {Normal}: Adjust the overall image and background screen
brightness (backlight).
• {ACS}: Apply brightness value (backlight) which is adjusted by
MIC tool. The default value before adjustment is the same as
OSD brightness value, e.g., 70)
• Type: {Manual}/{Tiling tool}
• Source resolution: {Full HD}(Default)/ {4K}
• H monitors - Select the number of displays on the horizontal side.
• V monitors - Select the number of displays on the vertical side.
• Position - Select the position of this display in the screen matrix.
• Frame comp. - Choose to turn the frame compensation function
on or off. If selected {Yes}, the display will adjust the image to
compensate for the width of the display bezels in order to
accurately display the image.
NOTE: D oesn't support screen format function in tiling using cascade
mode.
Off Timer
Set automatically power off time (in hours).
Date and time
Adjust the current date and time for the display's internal clock.
Date and time
Auto Sync
Year
Month
Day
Hour
Minute
Daylight saving time
Current date time
1. Press [OK] button to enter the submenu.
2. Press [ ] or [ ] button to toggle between {Year}, {Month}, {Day},
{Hour}, {Minute}, and {Daylight saving time}.
3. Press [ ] or [ ] button to adjust all settings except {Daylight
No
2015
1
1
22
40
2015 . 01 . 01 22 : 41 : 00
Press [OK] to set clock
saving time}.
4. Press [OK] button to enter the {Daylight saving time} submenu.
5. Press [ ] or [ ] button to select item, press [ ] or [ ] button to
adjust.
The Daylight saving time definition and behavior:
The current implementation of daylight saving is a reminder tool for
the customer which doesn't know how to adjust the clock for daylight
saving on and off. It does not adjust the real time clock automatically.
Problem is that there are no stable rules per region, or country when to
adjust the clock. To solve this the user must be able to set the daylight
saving start en stop date. When daylight saving correction is on (user
selectable) then the real time clock should be adjusted at the moment
in time set in the daylight saving on and off date. At daylight start date
the clock should be put forward 1 hour at 2 o'clock. At daylight stop
date the clock should be put back 1 hour at 2 o'clock.
The existing daylight on/off menu item should be replaced with the
following menu structure:
• Menu item <Daylight saving setup> opens submenu containing the
following items:
• Menu item <Daylight-saving start date> Selection item <1st, 2nd,
3rd, 4th, last> Sunday of selection item <1-12 month>
• Menu item <Daylight-saving stop date> Selection item <1st, 2nd,
3rd, 4th, last> Sunday of selection item <1-12 month>
• optional
• Menu item <Correction time> Selection item <0.5, 1.0, 1.5, 2.0>
hour
• Menu item <Daylight saving correction> Selection item <on, off>
when "daylight saving" is "on" the real time clock would have been
adjusted automatically for winter and summer time when passing the
critical moment in time (eg march 29, 2009, 02.00 o'clock: time will be
set 1 hour later or October 25, 2009, 02.00 o'clock: time will be set 1
hour earlier)
Schedule
This function allows you to program up to 7 (seven) different scheduled
time intervals for the display to activate.
You can select:
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
• Which input source the display will use for each scheduled
activation period.
NOTE: W e recommend you to set up current date and time in the
{Date and time} menu before using this function.
1. Press [OK] or [ ] button to enter the submenu.
Schedule
Today
1
2
3
4
5
6
7
2. Press [ ] or [ ] button to select a schedule item (item number 1 ~ 7),
and then press [OK] button to mark it the item number.
50
2015 . 01 . 04 SUN 04 : 14 : 01
On O Input
＿ ＿ : ＿ ＿ : ＿
MON TUE
WED THU FRI
SAT SUN Every week
playlist 0
Clear all