Philips SignageSolutions 55BDL5057P User Manual page 60

55BDL5057P
Zoom
Expands the horizontal and vertical sizes of the
image simultaneously.
H zoom
Expands the horizontal size of the image only.
V zoom
Expands the vertical size of the image only.
H position
Moves the horizontal position of the image left
or right.
V position
Moves the vertical position of the image up or
down.
Auto adjust
Press "Set" to detect and adjust H position, V position, Clock, Phase
automatically.
Screen reset
Reset all settings in the Screen menu to factory preset values.
Select "Yes" and press "SET" button to restore the factory preset data.
Press "EXIT" button to cancel and then return to the previous menu.
6.2.3. Audio menu
Balance
Picture
Treble
Bass
Screen
Volume
Audio out(line out)
Audio
Maximum volume
Minimum volume
PIP
P
Mute
Audio source
Con guration 1
Sync.Volume
Balance
Adjust to emphasize left or right audio output balance.
Treble
Adjust to increase or decrease higher-pitched sounds.
Bass
Adjust to increase or decrease lower-pitched sounds.
Volume
Adjust to increase or decrease the audio output level.
Audio out (line out)
Adjust to increase or decrease line out output level.
50
50
50
30
30
100
0
O
Analog
O
46
Maximum volume
Adjust your own limitation for the maximum volume setting. This stops
the volume from being played too loudly.
Minimum volume
Adjust your own limitation for the minimum volume setting.
Mute
Turn the mute function on/off.
Audio source
Select the audio input source.
Analog: audio from audio input
Digital : audio from HDMI/DVI audio.
Displyport: audio from DP.
Sync. Volume
Enable/disable audio out (line out) volume adjustability to sync with
internal speakers.
Card OPS audio
Select the analog or digital audio mode for card OPS.
Audio reset
Reset all settings in the Audio menu to factory preset values.
6.2.4. PIP menu
Sub mode
Picture
PIP size
PIP position
Screen
PIP change
PIP source
Audio
PIP audio
PIP reset
PIP
P P
Con guration 1
Sub mode
Select the sub mode.
Choose from: {Off} / {PIP} / {Quick swap} / {PBP}.
Off
Quick swap
PIP size
Select the size of the sub picture in the PIP (Picture-in-Picture) mode.
Choose from: {Small} / {Medium} / {Large}.
O
Small
Bottom-Right
Action
VGA
Main
Action
PIP PBP 2Win
Sub Win1
Input
Switch main on top or
sub on top.