Kenwood DMX1037S Instruction Manual page 93

Connection/Installation
HDMI input
6
Use HDMI cable KCA-HD100 (optional
accessory).
When you connect the cable to HDMI terminal,
remove the fixture. After connecting the cable,
put the fixture again.
iDatalink connector
7
Dashboard camera interface
8
Connect a Dashboard Camera DRV-N520
(optional accessory). (P.94)
AV Audio input (ø3.5 mini jack)
9
Accessory 6: GPS Antenna
10
Use the supplied GPS antenna. Using the GPS
antenna other than the supplied one may
cause a drop in positioning accuracy.
3rd view camera input (Yellow). See To set up
11
the camera assignment settings (P.57).
Rear view camera input (Yellow) *
12
Front view camera/Dashboard camera input
13
(Yellow).
See To set up the camera assignment
settings (P.57). *
Video output (Yellow)
14
Video input (Yellow)
15
*1 Connect an HD camera to Rear view camera
input terminal to use HD video.
*2 Connect an HD camera to Front view camera/
Dashboard camera input terminal to use HD
video.
92
Fixture
HDMI connector
1
2
Ñ
Connecting a USB device
Accessory 2 (1 m)
USB terminal
USB maximum power supply current :
[1]
DC 5 V 1.5 A
Sold separately
[2]
See Securing the USB extension cable
[3]
(P.93).
[3]
USB device
[2]
[1]