Turning On Your Tv For The First Time - Insignia NS-24D310MX17 User Manual

Turning on your TV for the
first time
The first time you turn on your TV, the Easy Setup
wizard opens. The wizard guides you through setting
up basic settings including the menu language, time
setting, picture mode, TV signal source, and the
channel list.
1 Make sure that you have:
• Installed the remote control batteries. (See
page 29.)
• Connected an antenna, cable TV, or satellite TV.
(See page 14 through page 17.)
• Connected the power cord. (See page 28.)
2 Press (power) to turn on your TV. The Easy Setup
wizard opens.
3 Press or to highlight a language, then press
ENTER.
4 Press
5 Press
6 Press
www.insigniaproducts.com
or to select Yes (to turn on the Voice
Guide) or No (to turn off the Voice Guide), then
press ENTER.
Note:
Depending on when you purchased your TV, the
Voice Guide option may not be available during
setup.
or to highlight Home Use Mode or
Store Display Mode, then press ENTER.
If you selected Store Display Mode, a message
asks if you are sure you want this mode. Select OK
to continue using Store Display Mode, or select
Cancel to change to Home Use Mode. Store
Display Mode is not an energy savings mode.
or to highlight an option, then press
ENTER. You can select:
• Watch TV to skip the customization options. You
can press MENU later to customize settings. Go
to Finish the wizard on page 32.
• Customize my TV to set options to maximize
your experience. Go to Customize my TV
page 32.
24" 720p 60Hz LED TV
on
31