Raymarine HYPERVISION HV-300 Installation Instructions Manual page 23

• The transducers should be installed away from any protrusions such as other transducers, steps,
ribs, strakes, or rows of rivets.
• Transducers should be installed in a location where no load will be applied to the transducers
during, launching, lifting, trailering and storage of the boat.
• Transducers must be installed in the correct orientation, with the anti-rotation bolt closest to
the stern of the vessel. Additionally, a direction arrow pointing to the bow is embossed on the
transducer.
• When installing split-pair transducers:
– the correct transducer (port or starboard) must be installed in the matching (port or starboard)
side of the hull; each transducer in a split pair has a label on the attached cable, and markings
on the top of the transducer stem to help you identify the transducer and orientation:
Item Color
1 Red
2 Green
Installation
Description
Port-side split-pair transducer cable
Starboard-side split-pair transducer cable
23