23
24
25
26
27
28
29
Using Your TV With a Universal or Learning Remote Control
Preprogrammed universal remote controls can be programmed to control the following
functions on your Dell TV:
•
Power
•
Channel Up (+)
•
Channel Down (-)
•
Volume Up (+)
•
Volume Down (-)
•
Mute
•
Input Select
NOTE:
You can program universal remote controls to work with your Dell TV in the following ways:
•
If the remote control manual lists codes by manufacturer, use the Philips codes.
•
If the remote control has a search function, this function may be used to find the
correct code.
•
If the remote control has a learning function, you can program specific buttons on it from
the Dell remote control, in addition to those buttons listed above.
NOTE:
remote control.
26
Using Your Remote Control
Vol +
Increases the volume
ENTER
Press to confirm the channel frequency entry
POS
Press to change the position of the PIP , POP , or PBP window
SWAP
Swaps images when using PIP , or PBP
PIP
Enters and exits PIP mode
EXPAND
Cycles through three enlargement modes:
• Top half of page in larger letters.
• Bottom half of page larger letters.
•
Regular viewing
TEXT
Cycles through three Teletext modes:
• On
• Mix (Teletext and program simultaneously)
•
Off
Future preprogrammed universal remote controls may be able to control more functions.
For additional information, see the documentation that came with your universal or learning