Connections
Connect the EUT to the test station using a gauge adapter and lens ring from the selection
provided.
This unit can generate very high pressures and, as a
consequence, only metal-to-metal sealing is acceptable, i.e. no
sealing washers of any description should be used (see Figure
3.1 and 3.2 for methods of sealing).
Shop for Fluke products online at:
W Caution
Figure 3-1. Pressure Connection - Method 1
MyFlukeStore
www.
Chapter 3
Operation
glf02.eps
1.800.561.8187
.ca
3-1