Product Description - AEG L8FE74485 User Manual

Make sure that the drain
hose end is not immersed in
the water. There may be a
return of dirty water into the
appliance.
3. To a stand pipe with vent-hole -
Insert the drain hose directly into a
drain pipe. Refer to the illustration.
The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm -
min. 1.5) must be larger than
the external diameter of the
drain hose.
4. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.

4. PRODUCT DESCRIPTION

4.1 Special features
Your new washing machine meets all
modern requirements for an effective
treatment of laundry with low water,
energy and detergent consumption and
respectful of fabric care.
• The Oko-Mix technology has been
thought to protect the fabric fibres
thanks to different pre-mixing phases
5. Without the plastic hose guide: Put
the drain hose in the spigot and
tighten it with a clip. Refer to the
illustration.
Make sure that the drain
hose makes a loop to
prevent particles going into
the appliance from the sink.
6. Position the hose directly to a built-in
drain pipe in the room wall and
tighten it with a clip.
You can extend the drain hose to
maximum 400 cm. Contact the
authorized service centre for the other
drain hose and the extension.
that dissolves first the detergent and
then fabric softener in the water
before they are distributed in the
laundry. So every fibre is reached and
cared of.
• The ProSense technology detects
the laundry amount defining the
programme duration in 30 seconds.
The washing programme is tailored to
the laundry load and the type of fabric
ENGLISH 9