General Safety Requirements; Operating Costs; Disposal And Recycling - Prem-I-Air EH1910 Manual

Domestic wiring must be tested periodically by a qualified electrician at least once every 10 years or at every change
of occupancy. For office and retail premises, and buildings such as village halls, the wiring must be inspected at least
once every 5 years. It is recommended that all building be fitted with smoke alarms (it is mandatory for new
buildings).
When used in an office environment, we recommend that this product should be safety-tested yearly by a qualified
electrician (PAT Tested).
We recommend that it is PAT tested regularly when used in a domestic environment.
If the mains lead is damaged, it must be replaced by the manufacturer or an authorised service centre. If the mains
plug needs to be replaced, proceed as follows:
At time of going to press, the average cost of electricity is £0.15 per unit (kilowatt-hour). The amount you are being
charged will be shown on your electricity bill. At this cost, the EH1908 will cost £4.80 per day to run on the "High
Speed" setting.
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal is free of charge to the end-user.
When replacing an existing appliance with a similar new appliance your retailer may take the old appliance for
disposal.

GENERAL SAFETY REQUIREMENTS

TESTING
 Connect the brown wire to the terminal labelled "L"
 Connect the blue wire to the terminal labelled "N"
 Connect the green and yellow wire to the upper terminal labelled "E"
 Make sure that the cord-grip is positioned correctly (over the outer sheath
of the cable) and it fully tightened.
 If the plug is fitted with a fuse other than 13A, then please replace with an
approved fuse of the correct value.

OPERATING COSTS

DISPOSAL AND RECYCLING