Smeg SCT105-9 Manual page 13

6.5 Operating modes
This appliance is designed to have two operating modes.
6.6 First use
On the first use, or after a power failure,
display. To be able to start any cooking function, the current time must be set.
Turn the temperature selection knob right or left
to reduce or increase the displayed time.
Keep it in the turned position to reduce or
increase more rapidly.
A few seconds after the last adjustment is
made, the time display will steady and the colon
separating the hours from the minutes will flash
to indicate the start of the countdown.
It may be necessary to alter the current time, for example due to daylight saving
time; if so, hold the temperature selection knob turned to the right or left until the
value changes.
It is not possible to change the time if the oven is ON.
56
Instructions for the user
STAND-BY mode: this mode is set when the function
selection knob is positioned on "0". The appliance
displays the current time.
ON mode: this mode is set when the function selection
knob is turned to any function and the selected
temperature appears on the display, or the message
"PYRO" if pyrolysis is taking place.
will be flashing on the oven's
(Temperature knob)