Electro-Voice EKX-15SP Manual page 30

EKX Powered Loudspeakers
INFO
EXIT
Table 6.2: Subwoofer DSP Control Menu
EXIT Menu
The Exit menu is used to return to the home screen.
Notice!
The display returns to the home screen after two minutes of inactivity.
MODE Menu
The Mode menu is used to configure the type of sound the subwoofer delivers.
Available options for this selection are: MUSIC, LIVE, and CLUB.
▪
▪
▪
LOCATION Menu
The Location menu is used to control output of the subwoofer when used in arrays with other
subwoofers.
Available options for this selection are: NORMAL and CARDIOID.
▪
▪
LOW PASS Menu
The LOW PASS menu is used to select low pass frequency for proper summation with a
full-range loudspeaker.
Available options for this selection are: 80 Hz, 100 Hz, 120 Hz, 150 Hz, EKX-12P EKX-15P
ELX112P, ELX115P, ZLX-12P, and ZLX-15P
The low passes are 24 dB/octave Linkwitz/Riley slopes. The 80 Hz, 100 Hz, 120 Hz, and 150 Hz
selections are generic low pass settings for use with other full-range loudspeaker systems. The
EKX-12P EKX-15P ELX112P, ELX115P, ZLX-12P, and ZLX-15P settings are specifically
optimized for full-range loudspeakers for best summation.
The default is 100 Hz.
LED Menu
The LED menu shows power on and indicates limit. Available options for this selection are:
ON, OFF or LIMIT.
▪
▪
2017.01 | 06 | F.01U.318.952
MUSIC – is used for recorded music playback and EDM applications. (Default)
LIVE – is used for live sound applications.
CLUB – is used for recorded electronic music playback.
NORMAL – is used for a single subwoofer, or an array of subwoofers where the desired
output is effectively omnidirectional. This setting should also be used for the front firing
subwoofers in a cardioid array. Under most circumstances, the subwoofer should be set
to NORMAL. (Default)
CARDIOID – should ONLY be used on the rear firing subwoofers in cardioid arrays.
ON – turns the LED on when the power to the loudspeaker is ON. (Default)
OFF – turns the LED off.
[PRODUCT NAME]
[FIRMWARE VERSION]
User Manual Electro-Voice