Table of Contents
Advertisement
adversely affect the performance of your wireless system. It is always best to place the receiver as far away as
possible from these devices to minimize potential problems.
Analog and Digital Television stations can also interfere with your wireless system. The R300 is designed to
operate over 16MHz of RF bandwidth, which covers 3 US TV stations. If two of the three stations are used
in your area, it will severely limit the number of systems that will operate together and you should be using a
different band.
Battery Recommendations
Fresh AA alkaline batteries from a quality manufacturer will yield the best performance from your R300
transmitters. If sound quality degrades during use, it may be the result of a weakening battery.
Receiver and Antenna Placement
Do not place the receiver near a large metal object or surface. Locate the receiver as close as possible to the
area where the transmitter will be used. Ideally, position the receiver/antennas within sight of the transmitter.
When using multiple systems, do not allow antennas to cross or touch each other.
Transmitter and Antenna Distance
Keep all transmitters at least 3 meters (10ft) away from the receivers and antennas for best operation. If
possible, mount the receiver antennas 3 meters (10ft) above the stage so transmitters can not come too close.
21
Advertisement
Table of Contents
