Ftp - D-Link DCS-930L User Manual

Section 4 - Configuration
This section allows you to configure a FTP server to receive images from the camera.
Host Address:
This is the IP address of the FTP server that you will be connecting to.
Port Number:
Default is port 21. If changed, external FTP client program must change the server
connection port accordingly.
User Name:
Specifies the user name to access the external FTP server. If you are to upload
snapshots to an FTP server you will need to fill in the Domain name or IP address of
your external FTP server. The following user settings must be correctly configured
for remote access.
Password:
Specifies the password to access the external FTP server.
Directory Path: Specifies the destination folder in the external FTP server.
Passive Mode:
Enabling passive mode will allow access to an external FTP server if your camera is
behind a router protected by a firewall.
D-Link DCS-930L User Manual

FTP

33