Table of Contents
Advertisement
Connecting the cables
To install the monitor on your host system, please follow the steps below:
1.
Turn off your computer and unplug your computer's power cord.
2.
Connect the signal cable to the DP (optional) and/or HDMI (optional) input
socket of the monitor, and the DP (optional) and/or HDMI (optional) output
socket of the graphics card on the computer. Then tighten the thumbscrews on
the signal cable connector.
3.
Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4.
Insert the monitor power cable into the power port at the back of the monitor.
5.
Connect the power adapter and power cord to the monitor, then to a properly
grounded AC outlet.
-----------------------------------------------------------------------------------------------------------
Note: Audio output is only for audio output model. Please check user manual for
more instruction.
HDMI 1(2.0)
HDMI 2(2.0)
7
USB
DP
XV273K User Guide English
Advertisement
Table of Contents
