Coleman 4000 Series LG40811E Assembly Instructions Manual page 7

Assemble FRONT HANDLE Assembly to the GRILL LID (55) in detail 5-A.
Assemble two GUARDS (42b), COOKING GRIDS (63) and WARMING
Step
RACK (65). See detail 5-B.
5
58
60
DT
AO
AO
5-A
55
AO
5-A. The FRONT HANDLE (58), HANDLE SPACER (60),
HANDLE INSULATOR (59), four screws (DT) and four
hex nuts (AO) are PRE-ASSEMBLED at the factory.
Remove the four hex nuts (AO) from the Handle
assembly.
Insert the screws in the Handle assembly into the
GRILL LID (55) and secure with four hex nuts (AO).
Tighten with adjustable wrench or 7/16" wrench.
DT
59
AO AO
AO
1
42b
5-B. Place two GUARDS (42b) on the front lip of the Bottom
65
63
63
Casting (see fig. 1). Align the clip over grid lugs. Place the
COOKING GRIDS (63) in the Bottom casting with the
smooth surface down.
Set the WARMING RACK (65) near the back of the bottom
casting.
Hardware shown actual size
(4) Qty.
(4) Qty.
5-B
63
11412133 (Pg. 7)