Janome Memory Craft 550E Instruction Book page 53

x c
v
t
b n
m ,
y
.
!0 o
⁄0
r
e
w
q
y
u
i
2 mm
o
o
x Embroider following parts; both arms, cut-off line,
fangs, white of the eye, mouth, and eyeball. Raise the
presser foot when the machine stops automatically
after the sewing of the eyeball is finished. Place the
horn shaped fabrics (such as felt) as shown on the
step c and fix them with sticky tape or a pin.
* Do not use too thick fabric for the horns. It may not
be possible to embroider.
e Horns (desired material and shape)
r Sticky tape
c Lower the presser foot and sew the horns.
* Although the message "Color Cange" is displayed,
you can continue sewing without changing the color
of thread.
v After the sewing is finished, apply glue on the both
sides of the embroidery design as shown.
Place the stabilizer-attached-fabric 2 with the right
side down on the fabric 1 and stick them with a glue.
q Fabric 1 (right side)
w Stabilizer
t Apply glue
y Fabric 2 (wrong side)
b Embroider the rest of the design.
After the sewing is finished, remove the fabrics from
the embroidery hoop.
* Use the same (or similar) colors for the fabrics and
threads, so that the threads will not stand out (or pop
up) when turning the fabric inside out.
n Remove the stabilizer form the fabric 1 and fabric 2.
Cut the fabrics along the cut-off line (outmost seams)
with scissors.
* Warm up the stabilizer with iron to remove the
stabilizer easier. Cover the stabilizer with a cloth
when ironing to prevent sticking on iron.
u Cut-off line
i Fabric 1 (wrong side)
m Cut slits from the edge of the fabric to the 2 mm front
of the seam in curved area .
* Be careful not to cut the seam.
, Turn the doll inside out from the opening.
y Fabric 2 (wrong side)
o Opening
. Adjust the shape of the doll and stuff the doll with wad
cotton from the opening.
o Opening
!0 Wad cotton
⁄0 Stitch the opening by hand to close it.
o Opening
51