Cleaning The Filters - Hoover DM71DM03001 User Manual

CLEaning THE FiLTErS*

Washing filter and foam:
Rotate the BLUE filter pack to the unlock
position to release it from the dust
container.
separate the GREy foam filter from the
BLUE filter pack using the tab provided.
Wash the GREy foam filter thoroughly.
Gently tap to release excess dust.
Wash the filter with the BLUE housing
from the inside. DO nOT USE HOT
WATEr Or
DETERGEnTs!
remove excess water by shaking and
leave to dry for 24 hours. Refit filters only
when completely dry.
Do not use a brush as this will damage the
filter.
* Certain models only
Washing pre-motor and exhaust filter:
The pre-motor filter should be washed every
three months.
The Carbon filter is normally maintenance
free, this component should not be washed. If
a replacement is required please contact our
spares department.
The exhaust filter should be washed every month.
Press down on the latch to remove the exhaust
cover and filter.
Wash filters under hand warm water.
DO nOT UsE HOT WATER OR DETERGEnTs!
remove excess water by shaking and leave to
dry for 24 hours. Refit filters only when completely
dry.
!
imPOrTanT: For optimum cleaning performance, always keep
your filters clean.
- 6 - - 6 -
gB