Geometry - Casio ClassPad 330 Step-By-Step Manual

Drawing an Ellipse with Foci
m
a. Tap and then
n and select the ellipse
nd
b. Tap the 2
with foci icon
c. Tap twice (about 1 inch apart)
d. Tap a third time and drag until you
are happy
Adding Segments and Selecting
n
nd
a. Tap the 2 and select the segment
icon
b. Tap point A and then point C
c. Tap point B and then point C (Notice
the status bar as you tap!)
st
d. Select the 1 toolbar button (G) to
change to select mode
e. Tap point C, let go, and then press on
C and drag to move it
Displaying Measure
a. Tap the right most
Measurement Box
b. Tap in any white space to deselect C
c. Tap segment AC to select it
d. Tap segment BC to select it
n
Q
e. Tap and select
Q
f. Tap to put the angle value in the
Geometry window
g. Select point C and drag – your angle
measure updates as you move
Copyright © 2009 CASIO COMPUTER CO., LTD. All Rights Reserved.
Using the Geometry Application
G
u
to discover the
(if needed)
CASIO ClassPad 330 and ClassPad Manager Software Version 3.04 15