Tvm Graph - Casio Algebra FX2.0 Software Manual

11. TVM Graph

The TVM Graph lets you assign two of the five parameters (
y
and -axis of a graph, and plot changes in
Press 5(TVM) from the Financial 2 screen to display the following input screen for TVM
Graph.
• 6(g)5(TVM)
After configuring the parameters, press the function keys noted below to assign parameters to
the x -axis and y -axis.
• 1(X) ... Assigns highlighted parameter to the
• 2(Y) ... Assigns highlighted parameter to the
After making the required settings, draw the graph.
• 6(GRPH) ... Draws graph
After drawing a graph, you can press 1 (TRACE) to turn on trace and read calculation results
along the graph.
Press i to turn off trace.
Pressing 6 (Y-CAL) after drawing a graph displays the screen shown below.
-axis value on this screen and pressing w displays the corresponding
Inputting an x
value.
Press i again to return to the parameter input screen.
•Calculation may take some time to perform when you specify
27
n , I %,
y x
as the value of changes.
x
-axis
y
-axis
I
% as the
PV , PMT , FV ) to the x -axis
y -axis
y
-axis parameter.