Table of Contents
Advertisement
LABEL PRINTING
Setting
Special
tape
You can adjust the length of the printed label in a range of -3 to +3.
1
Press the Adjustment key.
2
Select "Label Length" using the
value using the
3
Press the OK or Enter key to apply the setting.
• Press the Esc key to return to the previous step.
• Press the Space key to set the value to the default setting.
• One level is equal to approximately 1% of the total label length.
34
Adjusting the Label Length
Description
• Select this setting when using special tape.
• When using Fabric Tape, select "No Cut" for
Cut Options before printing. After printing,
remove the tape cassette from the P-touch
and use scissors to cut the tape.
Adjusting the Label Length
or
key.
or
key and set the
Example
• When multiple copies
are printed one time:
ABC ABC ABC
24.5mm 4mm
4mm
• When a label is printed
two times:
1
2
ABC ABC
24.5mm 26.5mm
1. 1st print
2. 2nd print
Advertisement
Table of Contents
